SACB-8/ 8-L-C GG SCO

https://www.phoenixcontact.com/gb/products/1516768 Sensor/actuator box header - SACB-8/ 8-L-C GG SCO - 1516768 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator box header, application: Standard, connection method: M12-SPEEDCON-socket Metal, number of slots: 8, number of positions: 4, coding: A - standard, slot assignment: single, status display: yes, pnp; master cable connection: Pluggable screw connection, shielding: no Key Commercial Data Packing unit 1 pc GTIN GTIN 4017918967499 Weight per Piece (excluding packing) 310.200 g Custom tariff number 85366990 Country of origin Poland Technical data General Rated voltage 24 V DC Max. operating voltage Umax 30 V DC Current carrying capacity per I/O signal 2A Current carrying capacity per slot 4A Total rated current 10 A 2x 8 A (For electrical isolation) Number of positions 4 Number of slots 8 Flammability rating according to UL 94 V0 Sensor/actuator connection system M12-SPEEDCON-socket Note NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. Unused slots are to be sealed off prior to commissioning. Suitable sealing elements are to be found under "Accessories". 01/03/2020   Page 1 / 12 https://www.phoenixcontact.com/gb/products/1516768 Sensor/actuator box header - SACB-8/ 8-L-C GG SCO - 1516768 Technical data Ambient conditions Degree of protection IP65 IP67 IP69K Ambient temperature (operation) -30 °C ... 80 °C Local diagnostics function Local diagnostics Supply voltage per module Green LED Status display I/O Yellow LED Master cable data/connection data Connection method Pluggable screw connection Tightening torque slot sensor/actuator cable 0.4 Nm Tightening torque of mounting screw for fixing the housing 0.5 Nm Insulation material Housing material PBT Material of the moulding mass PUR Contact material Cu alloy Contact surface material gold-plated Contact carrier material PA Material of contact, master cable side CU alloy Material of contact surface, master cable side Gold-plated Material of the contact carrier on the master cable side PA 6.6 V0 Material of threaded sleeve Zinc die-cast Material of threaded sleeve surface Nickel-plated O-ring material NBR Pin assignment Slot/position = Wire color or connection 1 / 4 (A) = 1 / 4 2 / 4 (A) = 2 / 4 3 / 4 (A) = 3 / 4 4 / 4 (A) = 4 / 4 5 / 4 (A) = 5 / 4 6 / 4 (A) = 6 / 4 7 / 4 (A) = 7 / 4 8 / 4 (A) = 8 / 4 1-8 / 1 (+ 24 V) = UN 1-8 / 3 (0 V) = 0 V 1-8 / 5 (PE) = PE Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 01/03/2020   Page 2 / 12 https://www.phoenixcontact.com/gb/products/1516768 Sensor/actuator box header - SACB-8/ 8-L-C GG SCO - 1516768 Technical data Standards and Regulations Connection in acc. with standard CUL Flammability rating according to UL 94 V0 Environmental Product Compliance Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 01/03/2020   Page 3 / 12 https://www.phoenixcontact.com/gb/products/1516768 Sensor/actuator box header - SACB-8/ 8-L-C GG SCO - 1516768 Schematic diagram Potential UN1 and UN2 bridged. Potential assignment: UN1 = UN2 = slots 1,2,3,4,5,6,7,8. Schematic diagram Electrically isolated. Potential assignment: UN1 = slots 1,3,5,7 and UN2 = slots 2,4,6,8. 01/03/2020   Page 4 / 12 https://www.phoenixcontact.com/gb/products/1516768 Sensor/actuator box header - SACB-8/ 8-L-C GG SCO - 1516768 Dimensional drawing Circuit diagram 01/03/2020   Page 5 / 12 https://www.phoenixcontact.com/gb/products/1516768 Sensor/actuator box header - SACB-8/ 8-L-C GG SCO - 1516768 Schematic diagram M12 slot, socket, 4-pos. Classifications eCl@ss eCl@ss 4.0 27140800 eCl@ss 4.1 27140800 eCl@ss 5.0 27143400 eCl@ss 5.1 27250300 eCl@ss 6.0 27279200 eCl@ss 7.0 27279219 eCl@ss 8.0 27279219 eCl@ss 9.0 27440108 01/03/2020   Page 6 / 12 https://www.phoenixcontact.com/gb/products/1516768 Sensor/actuator box header - SACB-8/ 8-L-C GG SCO - 1516768 Classifications ETIM ETIM 2.0 EC000200 ETIM 3.0 EC001856 ETIM 4.0 EC002585 ETIM 5.0 EC002585 ETIM 6.0 EC002585 ETIM 7.0 EC002585 UNSPSC UNSPSC 6.01 31261501 UNSPSC 7.0901 31261501 UNSPSC 11 31261501 UNSPSC 12.01 31261501 UNSPSC 13.2 31251501 UNSPSC 19.0 31251501 UNSPSC 20.0 31251501 UNSPSC 21.0 31251501 Approvals Approvals Approvals UL Recognized / cUL Recognized / EAC / cULus Recognized Ex Approvals Approval details UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     Nominal voltage UN 24 V Nominal current IN 3A cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     Nominal voltage UN 24 V  FILE E 118976  FILE E 118976 01/03/2020   Page 7 / 12 https://www.phoenixcontact.com/gb/products/1516768 Sensor/actuator box header - SACB-8/ 8-L-C GG SCO - 1516768 Approvals     Nominal current IN 3A EAC  cULus Recognized      RU CDE.AI30.B.01102      Accessories Accessories Device marking Snap-in markers - UC-EM (17,5X9) - 0827490 Snap-in markers, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID, BLUEMARK ID COLOR, BLUEMARK CLED, BLUEMARK LED, CMS-P1-PLOTTER, PLOTMARK, mounting type: snapped into marker carrier, lettering field size: 17.5 x 9 mm, Number of individual labels: 20     Snap-in markers - UCT-EM (17,5X9) - 0801491 Snap-in markers, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snapped into marker carrier, lettering field size: 17.5 x 9 mm, Number of individual labels: 24     Snap-in markers - UC-EM (17,5X9) YE - 0827494 Snap-in markers, Sheet, yellow, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snapped into marker carrier, lettering field size: 17.5 x 9 mm, Number of individual labels: 20     Snap-in markers - UCT-EM (17,5X9) YE - 0801492 Snap-in markers, Sheet, yellow, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snapped into marker carrier, lettering field size: 17.5 x 9 mm, Number of individual labels: 24     01/03/2020   Page 8 / 12 https://www.phoenixcontact.com/gb/products/1516768 Sensor/actuator box header - SACB-8/ 8-L-C GG SCO - 1516768 Accessories Labeled device marker Snap-in markers - UC-EM (17,5X9) CUS - 0828238 Snap-in markers, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snapped into marker carrier, lettering field size: 17.5 x 9 mm, Number of individual labels: 20     Snap-in markers - UCT-EM (17,5X9) CUS - 0801575 UniCard sheet, for labeling devices from other manufacturers, for overview table see download area, labeled according to customer specifications     Snap-in markers - UC-EM (17,5X9) YE CUS - 0828239 Snap-in markers, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting type: snapped into marker carrier, lettering field size: 17.5 x 9 mm, Number of individual labels: 20     Snap-in markers - UCT-EM (17,5X9) YE CUS - 0801576 UniCard sheet, for labeling devices from other manufacturers, for overview table see download area, labeled according to customer specifications     Mounting rail adapter DIN rail adapter - UTA 136 - 2853996 Universal DIN rail adapter, for screwing on switchgear     Plug for cable screw gland 01/03/2020   Page 9 / 12 https://www.phoenixcontact.com/gb/products/1516768 Sensor/actuator box header - SACB-8/ 8-L-C GG SCO - 1516768 Accessories Screw plug - PROT-MS SCO - 1553129     Screwdriver tools Adapter insert - TSD-M SAC-BIT ADAPTER - 1212600 Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits     Tool - SAC BIT M12-D15 - 1208432 Nut for assembling sensor/actuator cables with M12 connector and M12 connectors for assembly, with a knurl diameter of 15 mm, for 4 mm hexagonal drive     Tool - SACC BIT M12-D20 - 1208445 Nut for assembling M12 connectors for assembly with a knurl diameter of 20 mm, for 4 mm hexagonal drive     Philips screwdriver - SZK PZ1 VDE - 1206450 Screwdriver, PZ crosshead, VDE insulated, size: PZ 1 x 80 mm, 2-component grip, with non-slip grip     01/03/2020   Page 10 / 12 https://www.phoenixcontact.com/gb/products/1516768 Sensor/actuator box header - SACB-8/ 8-L-C GG SCO - 1516768 Accessories Tool - SAC BIT HOOD-W 24 - 1212486 Nut for assembling pressure nuts with 24 mm wrench size, for 4 mm hexagonal drive     Screw insert - SF-BIT-PZ 1-50 - 1212591 Screw bit, PZ crosshead, E6.3-1/4" drive, size: PZ 1 x 50 mm, hardened, suitable for holder according to DIN 3126F6.3/ISO 1173     Torque tool Torque screwdriver - TSD 04 SAC - 1208429 Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors     Torque screwdriver - TSD-M 1,2NM - 1212224 Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.3 ‑ 1.2 Nm     Torque screwdriver - TSD 25 SAC - 1212315 Torque screwdriver, with preset torque of 2.5 Nm and 4 mm hexagonal drive for the pressure nut of the connector hood     01/03/2020   Page 11 / 12 https://www.phoenixcontact.com/gb/products/1516768 Sensor/actuator box header - SACB-8/ 8-L-C GG SCO - 1516768 Accessories Torque screwdriver - TSD-M 3NM - 1212225 Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 1.2 ‑ 3 Nm     Necessary add-on products Connector hood - SACB-C-H180-8/ 8- 5,0PUR SCO - 1516577 Connector hood, application: Sensor/actuator box, connection method: M12-SPEEDCON-socket Metal, number of slots: 8, slot assignment: single, status display: No; master cable connection: Pluggable screw connection 180°, PUR/ PVC, cable length: 5 m, shielding: no     Connector hood - SACB-C-H180-8/ 8-10,0PUR SCO - 1516580 Connector hood, application: Sensor/actuator box, connection method: M12-SPEEDCON-socket Metal, number of slots: 8, slot assignment: single, status display: No; master cable connection: Pluggable screw connection 180°, PUR/ PVC, cable length: 10 m, shielding: no     Connector hood - SACB-C-H180 8- 8 SCO PUR/ - 1516690 Connector hood, application: Sensor/actuator box, connection method: M12-SPEEDCON-socket Metal, number of slots: 8, slot assignment: single, status display: No; master cable connection: Pluggable screw connection 180°, PUR/ PVC, cable length: 0.5 m ... 50 m, shielding: no     Connector hood - SACB-C-H180 8/16 SCO - 1516713 Connector hood with an integrated connector, for M12 sensor/actuator boxes with metal thread and pluggable screw connection, for 4, 6 or 8 slots     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 01/03/2020   Page 12 / 12